Engineering Center

I'm wondering if there is an anchor type that is suitable for a concrete slab that is 65mm thick.

I cannot find the data sheet for the rod to see what it's mechanical properties are. Is the rod SS Property Class 70 or 80?

Hi there, I just wonder if I wanna design a base plate connection (steel beam to masonry block wall) which base material should I choose? Normal NZ/AU masonry block with solid filled. Thank you

We are recreating an old HILTI PROFIS model done in 2021 due to some modifications and new loads based on the report created at the time (details are in the first page of attachment). Unfortunately, once we select HIT-HY 200-R V3 HAS-U 8.8 M20, the software does not solve and asks for selecting Hilti SOFA for the anchor arran...

We are trying to support from the top a brick arch. We will install a steel beam (PFC on the flat) and drill from the top through the arch and install chemical anchors at 600mm spacing. We plan to drill 700-1000mm deep.

Hi, are we able to use Hilti RE-500 fixing into laminated timber? I found the assessment report of Hilti RE-500 for timber connection. Do you have design spreadsheet for this? or design guide how this can be done?

I have fly braces which restrain EBF link and the other end of these fly braces are anchored to the underside of the double tee flange. Should I be using C1 seismic load type or static load type when designing the fixings for these fly braces? Also, is C1 seismic load type used to take into account of the cyclic nature of the...

i can see that the website shows 16mm screws where as the software only shows up to 14? Is there any other way or an equivalent that i can check my design for a 16mm?

For residential construction what is the minimum concrete edge distance for anchors? Do you have a standard design to meet requirements of NZS3604? We require 25mm overhang of the bottom plate due to H1 (insulation) requirements due to slab edge insulation.

Does it cost to sign up to an account with hilti? I just want to look at the webinar notes but part of signing up requires a billing address.