INJECTABLE EPOXY ANCHOR FOR USE IN CRACKED CONCRETE AND UNDER SEISMIC CONDITIONS
Hilti HIT-RE 500 V3 sets new standards for post-installed rebar and anchoring applications
Fifteen years ago, Hilti set legendary standards for designers and contractors alike with HIT-RE 500 – one of the first injectable epoxy anchors for post-installed rebar and anchoring applications. And because our customers needed the same high performance and reliability in cracked concrete and seismic applications, we introduced HIT-RE 500-SD for fastening under these conditions.
The new HIT-RE 500 V3 delivers performance and safety in design while making installation even easier and faster than ever before.
|Cracked and uncracked concrete
|Post-installed rebar connection
|All anchoring applications
|Slow cure epoxy injection mortar
|Curing time at +20°C
|Working time at +20°C
|ICC-ES report (concrete)
|ETA-16/0143 for Anchoring
|ETA-16/0142 for Post-installed rebar
|M8 – M30
|Ø8 - Ø40 mm.
|SafeSet with Hilti hollow drill bit
|Hammer drill bit
|Base material condition