Inserts - Hilti New Zealand

TE-C-HSC-B Stop drill bit Stop drill bit for HSC installation (TE-C)

TE-C-HDA-B Stop drill bit Stop drill bit – required for installation of HDA undercut anchors

TE-Y-HDA-B Stop drill bit Stop drill bit – required for installation of HDA undercut anchors

TX-BT 4.7/7 Stepped drill bit Stepped drill bit for pre-drilling holes for new-generation X-BT fasteners

Stepped drill bit TS-BT 5.3-65 S Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel

Stepped drill bit TS-BT 5.3-95 S Stepped drill bits for predrilling accurate holes or removing coatings for S-BT threaded screw-in studs on steel

TE-CD (SDS Plus) Metric hollow drill bit Ultimate SDS Plus (TE-C) hollow drill bit for virtually dust-free hammer drilling in concrete

TE-YD (SDS Max) Metric hollow drill bit Ultimate SDS Max (TE-Y) hollow drill bit for virtually dust-free drilling in concrete

S-SY B Screwdriver bit Customised screwdriver bits for Hilti screw fastening systems

Stepped drill bit TX-BT 31-74 PFP PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels

Stepped drill bit TS-BT 31-74 PFP PFP removal drill bits for predrilling accurate holes and removing coatings from PFP coated steels

HSU CDB Drill bit Drill bit for precise drilling in natural stone panels

1/2" S-NSD Impact socket set Impact socket set for tightening bolts and anchors

SI-S 3/8" Short impact socket 3/8" (inch) short impact socket for tightening bolts and anchors

SI-S 1/2" L Deep impact socket 1/2" long impact socket for tightening bolts and anchors

SI-S 1/2" S Short impact socket 1/2" (inch) short impact socket for tightening bolts and anchors

SI-S 1/2" DW Deep impact socket 1/2" (inch) long impact socket for tightening bolts and anchors, with magnetic impact and thin wall adaptation

S-NS (C) Nut setter Nut setter with non-magnetic / ball-lock screw retention for use with hex-head screws

TE Tool shaft Shank for sockets

S-TB Torque bar Torque-controlled socket wrench for setting HSA anchors