X-P MX Universal nails (collated)
Ultimate
Ultimate-performance collated nails for fastening to concrete and other base materials using powder-actuated tools
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD70.50
High-performance single nail for use with powder-actuated tools on concrete and other materials
- Base materials: Concrete (soft), Concrete (tough), Steel, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
From
NZD56.50
High-performance collated nail for concrete and steel, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD58.50
X-U P8 Steel/concrete nails
Ultimate
High-performance single nail for concrete and steel, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD58.50
X-U 15 P8 TH Steel nails
Ultimate
High-performance single nail for steel, for powder-actuated tools
- Base materials: Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 6 mm
NZD58.50
High-performance single nail with steel washer for concrete and steel, for powder-actuated tools
- Base materials: Steel, Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
NZD110.00
X-C MX Concrete nails (collated)
Premium
Collated nail for use with powder-actuated tools on concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick), Concrete, soft, Soft to medium reinforced concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD26.75
X-C P8 Concrete nails
Premium
Single nail for concrete, for powder-actuated tools
- Base materials: Concrete (soft), Masonry (solid limestone brick), Concrete
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD26.75
X-C P8 Wood pins
Premium
Standard single nail for use with powder actuated tools to fasten wood to concrete
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD44.75
Single nail with steel washer for concrete, for powder-actuated tools
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
- Environmental conditions: Dry indoor
From
NZD360.00
Collated formwork nail for concrete, for powder-actuated tools
- Base materials: Concrete (soft), Concrete, Masonry (solid limestone brick)
- Minimum thickness of base material (concrete): 80 mm
- Corrosion protection: Galvanised zinc coated <20 µm
From
NZD300.00
Stainless steel single nail for steel and concrete, for powder-actuated tools
- Minimum thickness of base material (steel): 5 mm
- Corrosion protection: Stainless steel A4(316) or equivalent
- Environmental conditions: Dry indoor, Indoor with temporary condensation, Outdoor temporary applications, Outdoor with low pollution, Outdoor with moderate concentration of pollution
From
NZD190.00
X-DS Steel/concrete nails
Ultimate
Universal fasteners
- Base materials: Steel, Concrete
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
NZD2,962.50
Collated sheet metal nail for fastening on steel structures, for the DX 76 tool
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
NZD1,305.00
Sheet metal nail
- Base materials: Steel
- Minimum thickness of base material (steel): 6 mm
- Corrosion protection: Galvanised zinc coated <20 µm
NZD161.00
Universal nail
- Base materials: Concrete (soft), Concrete (tough), Masonry (solid limestone brick), Steel
- Minimum thickness of base material (concrete): 80 mm
- Minimum thickness of base material (steel): 4 mm
From
NZD53.75
COVID-19 FAQ