Hilti (New Zealand) Limited:

0800 444 584

Chemical Anchors Leaflets

Hilti Corporate Website

Chemical Anchors

HAS-E Zinc Plated Threaded Rod

For use with HVU capsules and HIT adhesive anchoring systems.

Applications

  • Suitable for fastenings into concrete and hard natural stone in combination with HIT-HY 150, HIT-RE 500 or HVU capsules
  • Suitable for fastenings into cracked concrete with Hilti HIT-150 MAX-SD and Hilti HIT-RE 500-SD

Advantages
  • Large family of anchor rods (M8-M39)
  • Designed for use in solid concrete with Hilti HVU capsules or for different base materials with Hilti HIT Adhesive Anchoring Systems
  • Optimized design
  • Contains a roof cut end for cutting and mixing the Hilti HVU capsule, embedment marking for easy setting, and a conical head (M8-M24 only)


HAS-E-F Galvanised Threaded Rod

For use with HVU capsules and HIT adhesive anchoring systems.

Applications

  • Suitable for fastenings into concrete and hard natural stone in combination with HIT-HY 150, HIT-RE 500 or HVU capsules
  • Suitable for fastenings into cracked concrete with Hilti HIT-150 MAX-SD and Hilti HIT-RE 500-SD

Advantages
  • Large family of anchor rods (M8-M39)
  • Designed for use in solid concrete with Hilti HVU capsules or for different base materials with Hilti HIT Adhesive Anchoring Systems/li>
  • Optimized design
  • Contains a roof cut end for cutting and mixing the Hilti HVU capsule, embedment marking for easy setting, and a conical head (M8-M24 only)


HAS-E-R Stainless Steel Threaded Rod

For use with HVU capsules and HIT adhesive anchoring systems.

Applications

  • Heavy duty fastenings with small specings and edge distances
  • Suitable for fastenings into cracked concrete with Hilti HIT-150 MAX-SD and Hilti HIT-RE 500-SD

Advantages
  • Large family of anchor rods (M8-M39)
  • Designed for use in solid concrete with Hilti HVU capsules or for different base materials with HIT Adhesive Anchoring System
  • Optimized design
  • Contains a roof cut end for cutting and mixing the Hilti HVU capsule, embedment marking for easy setting, and a conical head (M8-M24 only)


HIS-N Internally threaded sleeve (With cover cap)

Inserts used with HIT adhesive anchoring systems and HVU capsules.

Applications

  • Inserts Used With HVU Capsules and HIT Adhesive Anchoring Systems

Advantages
  • Part of the Hilti HIT elements family
  • High Designed for use in solid concrete with Hilti HVU capsules or Hilti HIT-HY 150 MAX, Hilti HIT-RE 500, Hilti HIT-RE 500-SD
  • Optimized design
  • Roof cut end for cutting and mixing the Hilti HVU capsule (to be installed with HIS-S setting tool)
  • Ingenious
  • Different length


HVU Adhesive Capsule

The HVU adhesive anchor comprises a foil capsule and HAS threaded rod or HIS-N internally threaded sleeve.

Applications

  • Heavy duty fastenings into concrete and hard stone
  • Suitable for small spacing and edge distances

Advantages
  • Flexibility is the Key
  • Flexible foil capsule instead of glass: A robust product for real job site conditions
  • One System for all Applications: A multitude of adhesive capsules, anchor rods, internally threaded sleeves in various diameters and lengths
  • Safe usage


HIT-HY 70 Injectable Adhesive Anchor

Limitless flexibility in all types of masonry. Flexible, strong and reliable Injection System.

Applications
Quick and reliable fastening in:

  • Hollow brick masonry
  • Solid brick masonry
  • Composite masonry
  • Aerated light-weight concrete
  • Glass construction/facades

Advantages
  • Optimized application, comfortable and flexible
  • For indoor and outdoor applications, as well as for use in dry and wet drilled holes
  • Can be used at any time of year in a temperature range between -5 and +40° C
  • Fastenings are free of expansion forces and approved by technical approval departments
  • Non-bearing surfaces are effortlessly bridged
  • High degree of fire resistance


HIT-HY 150 MAX Fast Cure Hybrid Adhesive

Fast cure hybrid mortar

Applications

  • For high strength concrete anchoring and rebar installation
  • Fastenings in concrete, e.g. chemical injection bottom plate fixing, railings and safety barriers machines or heavy pipes
  • Post-installation of rebar connections, e.g. for building extensions, strengthening or replacement of steel reinforcement

Advantages
  • Suitable for non-cracked and cracked concrete C20/25 to C50/60
  • Suitable for dry and water saturated concrete
  • High loading capacity and high corrosion resistant
  • Rapid curing to boost application productivity: Fully cured in 30 minutes at 20°C
  • Free of styrene and plasticizers, low odour, reduced waste
  • Small edge distance and anchor spacing possible
  • A wide range of embedment depths and service temperatures
  • Suitable for hammer drilled holes


HIT-HY 150 MAX-SD Injectable Adhesive Anchor

Seismic approved fast cure mortar with strength design

Applications

  • Rebar installation for a variety of load bearing applications
  • Anchoring applications with threaded rod such as steel columns and beams, machines, equipment and ledger angles

Advantages
  • The first fast cure adhesive anchor with seismic approval for cracked concrete as per
    ICC-ES (International Code Council)
  • Suitable for non-cracked and cracked concrete C20/25 to C50/60
  • Suitable for dry and water saturated concrete
  • The fast cure time and easy installation greatly increases productivity: Fully cured in 30 minutes at 20°C
  • Free of styrene and plasticizers, low odour, reduced waste
  • Small edge distance and anchor spacing possible
  • Cold weather installations in service temperatures of -10°C and when concrete temperature reaches 40°C
  • Uses standard threaded rod or rebar – no special elements are required
  • Suitable for hammer drilled holes


HIT-RE 500 Adhesive for high loading

Slow cure pure epoxy

Applications

  • Heavy duty fastenings with rebar of different diameters and at great depth
  • Suitable for starter bars, construction joints, structural extensions, floor slabs, new columns, piers, structural enhancement and retaining walls
  • Fastening to old or new concrete and hard natural stone: Horizontal, vertical and overhead applications with patented Hilti drip-guard system

Advantages
  • Suitable for non-cracked concrete C20/25 to C50/60
  • Suitable for dry and water saturated concrete
  • Very high loading capacity with reinforcing bars in the range N10-N40 and high performance fastening with threaded anchor rod
  • Slow cure and optimum working time with extended temperature range from -5°C to 40°C
  • High corrosion resistant and suitable for under water application
  • Odourless epoxy and low wastage foil pack
  • Small edge distance and anchor spacing possible
  • A wide range of embedment depths and large diameter applications
  • Red coloured adhesive for easy checking of proper setting on site
  • Low sensitivity to oversized holes, dusty and wet holes
  • Suitable for hammer drilled holes and diamond cored holes


HIT-RE 500-SD Epoxy Adhesive

Seismic approved slow cure epoxy with strength design

Applications

  • For anchoring and dowelling in cracked concrete and seismic applications with a standard threaded rod, internally threaded sleeve and rebar and at great depth
  • Anchoring steel structures, machines, conveyor systems, crash barriers, storage systems, ideal for concrete overlay shear connectors and structural joints
  • Rebar installation for a variety of load bearing applications
  • Fastening to old or new concrete and hard natural stone: Horizontal, vertical and overhead applications with patented Hilti drip-guard system

Advantages
  • Seismic approved for cracked concrete as per ICC-ES (International Code Council)
  • Suitable for non-cracked and cracked concrete C20/25 to C50/60
  • Suitable for dry and water saturated concrete
  • Very high loading capacity with reinforcing bars in the range N10-N40 and high performance fastening with threaded anchor rod
  • Slow cure and optimum working time with extended temperature range from -5°C to 40°C
  • High corrosion resistant
  • Odourless epoxy and low wastage foil pack
  • Small edge distance and anchor spacing possible
  • A wide range of embedment depths and large diameter applications
  • Red coloured adhesive for easy checking of proper setting on site
  • Suitable for hammer drilled holes


Login  

Attention: Registration required

To proceed with your request, please log in first or register.

 

If you are not registered yet, register now for free to get these advantages:

    benefits of registration:
    - better online service
    - technical document download
    - cusotmized news
 
Auto Login